Hitohira Futana S3 Nashiji Kiritsuke Gyuto 240mm Cherry Wood act
Out of stock
Hitohira's Futana series is aimed at you who are looking for your first Japanese quality knife, but also for those who just appreciate aesthetics, quality and great cutting ability.
SB The series has the core of Aogami Super (Blue Super) Carbon steel which can keep an imported sharp egg for a really long time. Around the hard core steel, there is a layer of stainless steel on each side.
Since the core steel of aogami super is not stainless, a little extra care and care must be expected when used. It is recommended that the knife be washed and dried after use, and it is expected that the core steel develops patina over time. Something that in our eyes helps to give knives soul and charm.
S3 The series has a core of Ginsan, which is a high -quality stainless steel alloy that shares many of the same properties as blue and white carbon steel. The steel is clean and has a fine structure which allows it to be sanded into a huge sharpness. Around the hard core steel, there is a layer of stainless steel on each side. Then you are looking for a high -performance kitchen knife with minimal maintenance, then the S3 series is for you.
All our knives can be seen and tried in the grinding by appointment.
Specs:
Brand: Hitohira ひとひら (一 片)
Profile: Kiritsuke Gyuto
Size: 240mm
Steel Type: Stainless Steel
Steel: Yasuki Silver #3 (Ginsan), Soft Stainless Clad
Handle: Cherry Wood & Ebony Ferrule Octagonal
Total Length: 406mm
EDGE LENGTH: 244MM
Handle two tip Length: 260mm
Blade Height: 48mm
Thickness: 1.8mm
Handle Length: 143mm
Weight: 177g
Maintenance & Care
CARE AND MAINTENANCE:
NEVER PUT YOUR KNIVES IN THE DISHWASHER! That's it, and it applies to all knives. There are far too many chemical processes and changing heat effects for it to be good for anything made of steel. Most stock material cannot withstand it either.
You can roughly divide knives into two categories when we talk about care and maintenance; carbon knives (carbon knives) and stainless/semi stainless knives.
Carbon steel can be sharpened insanely sharp and holds an egg well (edge retention), but can rust and patina. Stainless steel has the advantage of being less prone to rust, but is not quite as sharp. Roughly speaking, because there are gradually many stainless "super steels" that have close to the same properties as carbon steel.
USE
Pay attention to how hard the knife is hardened. Be especially careful with knives of 60 hrc and above. Hard foods can "chip" the blade. Be careful with fruit stones, bones, shellfish, woody stems or very hard cheese. Frozen foods are a total no-go.
Your cutting board plays a big role. Use wood. Endwood is particularly good. Plastic can also be fine, but definitely not glass, granite or bamboo. Hinogi (cypress) is particularly good and otherwise there are from the very top shelf, rubber cutting boards with wooden handles.
Scraping the edge of the knife sideways will dull or damage your knife. Instead, use the back of the knife to move items across the cutting board. Do not twist the edge or pry the tip and for the record, your knife is NOT a screwdriver!
CLEANING
After use, wash the knife by hand with ordinary washing-up liquid, rinse with warm water and dry immediately. No dishwasher! Highly reactive steel, such as white #1, can be advantageously wiped off regularly during use. These types of steel can benefit from a little oil on the steel from time to time.
Wooden handles can dry out over time and exposure to water. Simply treat them with some food-safe mineral oil or beeswax. Can possibly lightly sanded with sandpaper before and after.
STORAGE
Take care of the egg, for your own sake and the sake of the knife. A saya (sheath) is optimal, but a simple blade cover will be fine if you store knives in a drawer or travel bag. Loosely lying in a drawer is a super bad solution.
A wall magnet made of wood is a great way to display your knives. Be sure to put it back on the spine first, then roll it on the surface of the blade. This will prevent the egg from making contact with the tree first. Steel knife magnets are a bad idea as they will scratch the blade of the knife.
Knife blocks are not optimal, neither for the egg nor for hygiene.
MAINTENANCE
All knives should be straightened before each use. This is best done on a leather strap. Steel irons are unsuitable for knives with a hardness of 59 and above. A ceramic version can be used here, but you have to be aware that it will grind and remove steel every time you use it. It is not appropriate if the egg simply needs to be "raised". We can help with leather straps and their use.
When the knife gradually becomes so dull that a definite sharpening is unavoidable, this is best done on a wet stone or a slow-moving sharpening machine. If you don't have the skills or the courage, drop it off with us and we'll take care of it.