Skip to content

Country

Hitohira NM Tsuchime Santoku 170mm Enju act

Regular price $148.00

Out of stock

Hitohira's NM series is characterized by fantastic "Fit and Finish" and unique cutting properties.

The blade is forged in stainless steel, with is the core of the VG-1 which gives the knife a terrific and prolonged sharpness. The blades are sanded ultra-thin so you will experience a fantastic cutting ability where the knife effortlessly slides through the subject.

Due to the hardness of the steel, one must be careful not to cut hard items such as legs, cartilage and frost, as small fractures can in the egg can occur

Specs:

Brand: Hitohira ひとひら (一 片)

Producing Area: Echizen-Fukui/ Japan
Profile: Santoku
Size: 170mm
Steel Type: Stainless Steel
Steel: VG-1, Soft Stainless Clad
Handle: Enju Octagonal
Total Length: 306mm
EDGE LENGTH: 170mm
Handle two tip length: 180mm
Blade Height: 47mm
Thickness: 2.7mm
Handle Length: 126mm
Weight: 120g
Hand Orientation: Ambidextrous
Hardness: 61 ± 1HRC

Maintenance & Care

CARE AND MAINTENANCE:

NEVER PUT YOUR KNIVES IN THE DISHWASHER! That's it, and it applies to all knives. There are far too many chemical processes and changing heat effects for it to be good for anything made of steel. Most stock material cannot withstand it either.

You can roughly divide knives into two categories when we talk about care and maintenance; carbon knives (carbon knives) and stainless/semi stainless knives.

Carbon steel can be sharpened insanely sharp and holds an egg well (edge ​​retention), but can rust and patina. Stainless steel has the advantage of being less prone to rust, but is not quite as sharp. Roughly speaking, because there are gradually many stainless "super steels" that have close to the same properties as carbon steel.

USE

Pay attention to how hard the knife is hardened. Be especially careful with knives of 60 hrc and above. Hard foods can "chip" the blade. Be careful with fruit stones, bones, shellfish, woody stems or very hard cheese. Frozen foods are a total no-go.

Your cutting board plays a big role. Use wood. Endwood is particularly good. Plastic can also be fine, but definitely not glass, granite or bamboo. Hinogi (cypress) is particularly good and otherwise there are from the very top shelf, rubber cutting boards with wooden handles.

Scraping the edge of the knife sideways will dull or damage your knife. Instead, use the back of the knife to move items across the cutting board. Do not twist the edge or pry the tip and for the record, your knife is NOT a screwdriver!

CLEANING

After use, wash the knife by hand with ordinary washing-up liquid, rinse with warm water and dry immediately. No dishwasher! Highly reactive steel, such as white #1, can be advantageously wiped off regularly during use. These types of steel can benefit from a little oil on the steel from time to time.

Wooden handles can dry out over time and exposure to water. Simply treat them with some food-safe mineral oil or beeswax. Can possibly lightly sanded with sandpaper before and after.

STORAGE

Take care of the egg, for your own sake and the sake of the knife. A saya (sheath) is optimal, but a simple blade cover will be fine if you store knives in a drawer or travel bag. Loosely lying in a drawer is a super bad solution.

A wall magnet made of wood is a great way to display your knives. Be sure to put it back on the spine first, then roll it on the surface of the blade. This will prevent the egg from making contact with the tree first. Steel knife magnets are a bad idea as they will scratch the blade of the knife.

Knife blocks are not optimal, neither for the egg nor for hygiene.

MAINTENANCE

All knives should be straightened before each use. This is best done on a leather strap. Steel irons are unsuitable for knives with a hardness of 59 and above. A ceramic version can be used here, but you have to be aware that it will grind and remove steel every time you use it. It is not appropriate if the egg simply needs to be "raised". We can help with leather straps and their use.

When the knife gradually becomes so dull that a definite sharpening is unavoidable, this is best done on a wet stone or a slow-moving sharpening machine. If you don't have the skills or the courage, drop it off with us and we'll take care of it.

Shopping Cart

Announce discount codes, free shipping etc